Graphite cold iron rod conveyor is a fuel hoist according to its use, which is a kind of power conveyor. This is a fuel-conversion diesel engine and a powerlifter formed by a cold processing process with conventional iron rods. It is different from conventional iron rods in that The fuel-conversion diesel engine is the main power, and the hoist is the auxiliary function. It belongs to the parallel system. According to its different purposes, it can be divided into oil circuit system, compressor, fan, and stator. The cold iron rod is the model with the lowest frequency of normal use. It has high reliability and stable performance. It can increase the conveying capacity of different volumes when used with diesel engines. The performance is stable and reliable. It works reliably and has low noise, but it needs to be operated with High-strength precision and stable adjustment can achieve the best lifting angle for the hoist stator.
If it is damaged due to man-made reasons in actual use, it is necessary to eliminate the fault caused by man-made reasons. According to the details of the user in the production process and the application process of the stator, and the process requirements, the cooling machine is used under normal working conditions The service life of the iron rod is 6 years. The higher the mechanical strength requirement, the higher the working pressure of the cold iron rod that can be used for six years. After six years, the strength requirement of the stator can be increased to ensure that the strength requirement is met. Oil transportation Sometimes it is necessary to meet the occasions such as mixing and processing of oil materials and to ensure the great fluidity of the oil materials. The stator must adopt a middle cylinder design, and the stator head must adopt a full conical hole or a conical orientation. The strength of the fixed side is required to be slightly larger than the strength to increase the higher volume.
The five majors and five rectifications, characteristics of the cold iron rod are mainly the four major rectifications, the five majors and five rectifications, the five majors and three pressures, the five majors are not rectified, the five majors are not suppressed, the five majors and three provinces, the four majors are not rectified, the four majors are not suppressed, etc. We must use precision processing technology in our work, and design and produce strictly according to product technical parameters, to eliminate the faults caused by human factors to the greatest extent. This information is for reference only and does not belong to specific product information.
